441 Build/Guess My Dyno #'S Please!

[torkflight]

Tork........this was just a joke for Speedo because threads like this make him furious because of the obvious. I really don't need anyone to guess the numbers but if you want to by all means go ahead. It will be a 441 smallblock all alluminum based off of the LS7 platform. Bore will be 4.125 and stroke will be 4.125 with 6.125 rods. Compression will be shooting for is 11.6-12.0. Ported LS7 heads and intake. I will also be running 2" racing headers with 3 1/2 inch collectors. 100MM throttlebody and MAF as you guys have seen from the other post. I'm not going to even post what I think it will be or even what were shooting for. I will be crank dynoing it first and at the same time I will be trying 3 different cams out and picking the best one. First I will use the QM600 that was in my 427, next we will try a cam that I have been working on, and then one my buddy Doug Rippie wants to try. After this I will put it back in and we will retune it on the Chassis dyno. Have at it!

I have studied all your specs and crunched a few numbers here, I keep coming up with the same conclusion, not sure why, but what I came up with is a very nice running very powerful motor that will probably run some great times should you be able to hook it up, although the thing that is confusing me is that no matter how I look at it, the horsepower I am coming up with is................................................ .......




















































No where near enough to beat me!!!!:bwahaha:

From what I have seen, guys have been getting 550-600 at the wheels.

Tork........this was just a joke for Speedo because threads like this make him furious because of the obvious. I really don't need anyone to guess the numbers but if you want to by all means go ahead. It will be a 441 smallblock all alluminum based off of the LS7 platform. Bore will be 4.125 and stroke will be 4.125 with 6.125 rods. Compression will be shooting for is 11.6-12.0. Ported LS7 heads and intake. I will also be running 2" racing headers with 3 1/2 inch collectors. 100MM throttlebody and MAF as you guys have seen from the other post. I'm not going to even post what I think it will be or even what were shooting for. I will be crank dynoing it first and at the same time I will be trying 3 different cams out and picking the best one. First I will use the QM600 that was in my 427, next we will try a cam that I have been working on, and then one my buddy Doug Rippie wants to try. After this I will put it back in and we will retune it on the Chassis dyno. Have at it!

sounds good, have you ever thought about getting a custom grind cam? Some good guys would be Jay Allen at camshaft innovations or Ed Curtis at flowtech induction, just a thought

[ramairws6]

Tork........this was just a joke for Speedo because threads like this make him furious because of the obvious. I really don't need anyone to guess the numbers but if you want to by all means go ahead. It will be a 441 smallblock all alluminum based off of the LS7 platform. Bore will be 4.125 and stroke will be 4.125 with 6.125 rods. Compression will be shooting for is 11.6-12.0. Ported LS7 heads and intake. I will also be running 2" racing headers with 3 1/2 inch collectors. 100MM throttlebody and MAF as you guys have seen from the other post. I'm not going to even post what I think it will be or even what were shooting for. I will be crank dynoing it first and at the same time I will be trying 3 different cams out and picking the best one. First I will use the QM600 that was in my 427, next we will try a cam that I have been working on, and then one my buddy Doug Rippie wants to try. After this I will put it back in and we will retune it on the Chassis dyno. Have at it!

lets get some specs, cam? flow numbers? bore and stroke? what are you building? hard to guess when all we have to go on is 427 cubic inch.

yeah I thought it was a Ford motor for **** sakes

[torkflight]

Gotcha Speedo! He!He!He! Don't tell me you weren't pissed when you seen that thread topic?! I just couldn't resist.:lol:

lets get some specs, cam? flow numbers? bore and stroke? what are you building? hard to guess when all we have to go on is 427 cubic inch.

damn.....alot

[ramairws6]

Man, I think you might be right in the ballpark Rerod!

11ty billion rwhp/ infinity rwtq

[ramairws6]

Ya, 427's been gone for awhile now. 441 is the plan. Still waiting on my crank and then it's time for assembly. Traver

So, your dropping in a 441? What you doing with the 427?

[ramairws6]

Never satisfied with anything! That's just me, always has been.

Not satisfied with the 427?

300hp 340tq

[ramairws6]

Gotcha Speedo! He!He!He! Don't tell me you weren't pissed when you seen that thread topic?! I just couldn't resist.:lol: